Big Brute Suck & Dump Flat Base – Dry

£2,270.00£3,700.00 + VAT

The Big Brute Suck & Dumps are ideal for safely emptying heavy, free-flowing waste into high-sided skips or hoppers, without the need for heavy lifting.

Protect your staff from manual handling whilst keeping your premises clean.

Clear

Description

Safely empty heavy waste loads with your forklift and a Big Brute Suck & Dump.

The Big Brute Suck & Dump vacuum cleaners are ideal for safely emptying heavy, free-flowing waste into high-sided skips or hoppers, without the need for heavy lifting.

These machines can be wheeled around site on their 4-wheeled trolleys, like all Big Brutes. Their trolleys have built-in forklift sockets so you can raise the whole Big Brute Suck & Dump up and move it over to your waste skip. Open the quick-release flap on the base and your waste is discharged quickly and without mess into your skip. Ideal for recycling material into process hoppers.

We offer 2 models: the Flat Base and the Cone Base. The Flat Base is an entry-level model ideal for use where cross-contamination isn’t critical as some waste product can remain within the drum. The Cone Base model, with its angled hopper base, empties completely and is ideal for processing free-flowing waste where preventing cross-contamination is more critical.

Both models use the same accessories and options as the Big Brute Popular and Warehouseman.

 

What’s it best for?

Ideal for dry, free-flowing material, such as pellets and grains. Also ideal for bulk recovery of such material that you want to empty quickly.

The Flat Base model is ideal for situations where you aren’t concerned about cross-contamination.

 

What do you get?

Power: 3 x 1.2kW motors.

Capacity: 180 litres including filters and heavy duty inlet spigot.

Filters: 2 dry fabric filters.

Hose: 63mm diameter with curved steel ends and rubber couplers (choose your hose length)

Trolley: Heavy duty, 4-wheeled with brake.

Tool: 1 meter long Ø63mm aluminium scraper.

Cable: 10m long with plug

Choose your Big Brute Power Unit Voltage

All electrically powered Big Brutes can be supplied with either a 230V power unit or a 110V power unit.

They both have 3 motors providing a total of 3.2kW of cleaning power.

Check which one is most suitable for your premises.

230V 16A Plug

230V

230V Big Brute power units have 3 motors giving a total of 3.2kW of cleaning power.

It runs from a single-phase, 16A supply.

Note that the 230V Big Brute power unit has a 16A plug, so you’ll need a 16A supply to power it.

No 16A supply? No problem – use with a Big Brute 16A-to-13A adapter lead (Part No V1337) to run it from a standard 13A socket.

110V 32A Plug

110V

110V Big Brute power units have 3 motors giving a total of 3.2kW of cleaning power.

It runs from a single-phase, 32A supply.

Note that the 110V Big Brute power unit has a 32A plug, so you’ll need a 32A supply on your transformer to run it.

Choose your Big Brute Power Unit Type

All Big Brute power units provide that famous Big Brute suction power. With 3 independently switched motors, you get powerful suction that will let you clean up with long, long hoses, without loss of suction.

The Big Brute Suck & Blow power unit harnesses all the suction power to blow dust and dirt away. Switch from suck to blow in seconds.

Both power unit types are available in 230V or 110V versions.

Suck Only

The Suck Only power unit does just that - sucks. But sucks well!

Our standard Big Brute power units come with 3 motors giving a total of 3.2kW of suction power.

Available in 230V or 110V versions.

Suck & Blow

Our Suck & Blow power unit has the same motors and suction power as the Standard Suck Only power unit.

However, the filtered air is directed through an exhaust port on the top of the power unit.

Simply push your suction hose onto the exhaust port to harness the Big Brute's 3.2kW of cleaning power in a continuous blast of air.

Ideal for dislodging dust and dirt from crevices or ledges.

Switch from suck to blow in seconds - and back again. Use your Big Brute's suction power to then suck up dirt and debris blown out.

Available in 230V or 110V versions.

Big Brute Trolley Options

Whether you want to make your Big Brute easier to push, or safe to empty it with your forklift, we’ve a Big Brute Trolley Option that will help.

Specify your Big Brute trolley option at the time of purchase.

Standard 4-Wheel Trolley

Our Standard 4-Wheel Trolley is our most popular option.

With 2 front swivel castors and 2 rear rubber wheels, it’s easy to push and manoeuvre.

SuperGlide Trolley

With Nylon wheels, the SuperGlide trolley makes it easy to push over smooth floors, such as polished concrete.

Because forklifts come in different sizes, your Suck & Dump trolley can be built in a size to accommodate your tines perfectly.

Just measure:

  • The centre-to-centre distance between your tines (A)
  • The width of your tines (B)
  • The height of your tines (C)

And choose the appropriate size tines for your trolley.

  • Standard Tines (ST)
  • Wide Tines (WT)
  • Extra-Wide Tines (XT)

How to measure your forklift tines to fit your Big Brute trolley

FeatureABC
Standard Tines (ST)454mm125mm75mm
Wide Tines (WT)479mm150mm75mm
Extra-Wide Tines (XT)554mm225mm125mm

Hose length options

Big Brute Standard Dry Suction Hose

Big Brute Standard Dry Suction Hose is 63mm diameter – wider than most industrial vacuum cleaner hose so it won’t block or kink easily.

It’s made from PVC with with a black outer with reinforcing threads, and supported by a helical PVC-coated wire.

It has an operating temperature of -20°C to 70°C and a weight of 0.5kg per metre.

Available in 3, 5, 10, or 15m lengths, without losing suction. Join multiple lengths together with a coupler to get even further reach.

A popular option is to have 2 lengths, one of 5m, one of 10m, and coupler. This gives you the flexibility of shorter lengths for cleaning in confined spaces and the ability to join the lengths to reach further.

This Big Brute is also available as a Warehouseman model.

The Big Brute Warehouseman version is ideal for cleaning large floor areas quickly, easily and without stirring up dust into the air.

If you’ve ever tried to sweep a floor clean, you’ll know just what an endless task it is. It’s hard work. Everything gets covered in clouds of dust – including you. It takes forever. And the floor doesn’t even feel that clean afterwards.

The Big Brute Warehouseman option includes a wide, front-mounted floor brush that skims the floor as you push, sweeping and sucking up dust and debris as it goes.

It has self-levelling arms which keep the brush in contact with the floor, so it’ll still work beautifully on even floors.

Its made completely of metal, so it’ll put up with all the knocks and bashes it’s going to get in industrial cleaning.

Give our friendly, knowledgeable team a call to see how the Warehouseman version of this Big Brute can help you clean your large floors more quickly and easily.

Compatible Accessories

Additional information

Weight80 kg
Dimensions101 × 64 × 148 cm
Power Unit Voltage

230V, 110V

Power Unit Type

Suck Only, Suck & Blow

Trolley Type

Standard 4-Wheeled Trolley, SuperGlide Trolley

Trolley Tine Size

Standard Tines, Wide Tines, Extra Wide Tines

Standard Dry Suction Hose Length

5m with Scraper Tool, 10m with Scraper Tool, 15m with Scraper Tool, No hose and no Scraper Tool

Drum Options

Standard Drum, Filter Shaker, Dust Extraction Kit, Filter Shaker and Dust Extraction Kit


Watch the Big Brute Suck & Drump Dry Flat Base In Action

Shifting large quantities of grain with the Big Brute Suck & Dump