Description
Safely empty heavy liquid waste, and dry waste, with the Big Brute Suck & Dump Wet & Dry Flat Base.
The Big Brute Wet & Dry Suck & Dumps are ideal for safely emptying waste into high-sided skips or hoppers, without the need for heavy lifting.
They’re suitable for cleaning up free-flowing dry waste, such as pellets, granules or grain, but can also handle liquid waste such as water and sludge.
These machines can be wheeled around site on their 4-wheeled trolleys while you clean. Their trolleys have built-in forklift sockets so you can raise the whole Big Brute up and move it over to your waste skip. Open the quick-release flap on the base and your waste is discharged quickly and without mess into your skip. Ideal for recycling material into process hoppers.
These machines perform all of the functions of our Big Brute Wet & Dry models, with the same awesome suction power. There are two basic models available; the Flat Base version and the Cone Base Version: both discharge via a 200mm-diameter dump valve in the base of the drum.
The Suck & Dump Wet & Dry Flat Base is a more budget-friendly version whereby some of the recovered waste may remain inside the drum after emptying. It’s suited to applications where you’re not concerned about cross-contamination.
If you need to safely empty heavy liquid waste, and dry waste, and are concerned about cross-contamination between loads, the Suck & Dump Wet & Dry Cone Base version has a hopper base that empties completely each time.
WHAT’S IT BEST FOR?
It’s ideal for recovering free flowing dry waste, or liquids, where you want to use your forklift to empty it safely.
The Suck & Dump Flat Base model is suitable for situations where you’re not concerned about cross-contamination in between loads.
WHAT SHOULD IT NOT BE USED FOR?
Not suitable for hazardous dust, flammable liquids or for use in zoned areas.
What do you Get?
Power: 3 x 1.2Kw by-pass motors
Hose: Wet & Dry Hose 63mm-diameter polyurethane with steel bends and rubber cuffs
Trolley: Heavy duty 4-wheeled rubber Tool 1 metre Ø63mm aluminium scraper tool
Cable: 10 metres long with plug.
Filters: 2 Dry Filters and an Overfill Protection Float Filter
