The Big Brute Suck & Dump Static is ideal for bulk recovery and decanting of materials where you don’t have forklift access. Note: Big Brute Vacuum Cleaner supplied separately.
Bulk material handling is quick and easy with the Big Brute Suck & Dump Static Industrial Vacuum Cleaner system.
The Big Brute Suck & Dump Static and your own Big Brute industrial vacuum cleaner make the ideal bulk material handling system. Together, the recovery and decanting of materials where you don’t have forklift access is quick, easy and cost-effective.
Power the Big Brute Suck & Dump Static with your own existing Big Brute vacuum cleaner to clean up or recover waste into the holding drum.
The hopper in the base then quickly empties your waste directly into flexible intermediate bulk containers (FIBCs) or skips below.
The Big Brute Suck & Dump Static can be tailored with many different options to suit your exact needs:
Interceptor Type
Optional cylonic interceptor reduces the carry over of fine dust into your Big Brute
Holding Drum
Choose from flat or cone base hopper for complete emptying between loads to reduce cross-contamination
Add an optional compress-air operated system to remotely empty the drum
Entraining hopper
Option entraining hopper directs materials more easily
Stand
Stands with optional ladders, handrails and wheels
The standard Big Brute Suck & Dump Static Interceptor option is ideal for waste with low dust content. All the filtration is done by the filters in your existing Big Brute.
Choose the Cyclone option if the material you’re collecting has a high dust content, or the dust is extra-fine. The Cyclone filter on the Suck & Dump Static uses cylconic separation to filter out most of the fine dust, reducing the amount of carry-over to your Big Brute.
Choose from 3 different drum types for your Big Brute Suck & Dump Static:
Plain Drum
The plain drum has a flat base with a flap and catch in the base for quick emptying.
Note that some of the material collected will remain inside the drum after emptying. It’s a more budget-friendly option and ideal for use where you don’t mind about cross-contamination between loads.
Cone Base Drum
The cone base drum has an angled hopper at the bottom, along with a flap and catch in the base for quick, complete emptying.
Because the drum empties completely, it’s a better option for use where cross-contamination is an issue between loads.
Cone Base Drum with Air Operated Flap
The cone base drum has an angled hopper at the bottom, along with a compressed-air operated flap and catch in the base for quick, complete emptying.
This drum empties completely, so is also a good choice where cross-contamination between loads is an issue. The compressed-air operated flap lets you remotely empty the drum without the need to get to the handle to do it manually. This lets you mount your Big Brute Suck & Dump Static on another level of your building, or in a different area of your processing plant. Uses your existing air compressor.
The Suck & Dump Static Etraining Hopper is useful to catch dumped material and direct it into FIBCs, etc.
Fitted with a bottom slide for material flow-control, dust vent and an FIBC securing-lip.
All stands are all-welded construction with a paint finish.
Refer to the comparison table opposite for approximate sizes. Note the heights are inclusive of the Big Brute Suck & Dump Static without the optional Cyclone interceptor.
Basic Stand
No floor.
Full Stand
Floor, hand rails and access ladder.
Full Stand with Wheels
Floor, hand rails, access ladder and SupgerGlide wheels on to move the whole Suck & Dump Static.
